Mactrol Automation Solutions Ltd.

Driving > Optidrive E2

Rich in features the Optidrive E is the most commercially competitive Optidrive in the Optidrive family.

Innovative and compact the Optidrive E range combines good looks with robustness, reliability and easy to use performance.

The product is dedicated to low power applications where total costs are ultra-competitive, including:
• Competitive purchase price
• Low installation costs
• Low commissioning costs
• Low technical support costs

Optidrive E has only 14 standard parameters to adjust in its basic form, thus Optidrive's legendary ease of use could not be easier or quicker to get started with. Optidrive E can be supplied with or without an internal rfi filter.

OPTISTICK

For fast and accurate repeat drive programming

Simply insert Optistick into the RJ485 slot on the face of the Optidrive E2:

• Upload/download buttons allow for fast copying of parameters between drives
• Infra red communications capability provides remote control convenience
• Can be programmed with PDA or Smart phone

Key Benefits

	Integral RFI filter option
	Integral brake chopper
	Modbus RTU serial communications
	Small mechanical envelope
	Rugged industrial 50ºC ambient rating for hot and tough applications
	Simple mechanical & electrical installation
	Simple operation, powerful features easy to use
	Fast setup, factory default settings ok for most applications, only 14 basic parameters (40 max)
	Motor current and rpm indication
	Debugging using troubleshooting & P-00
	150% overload for 60 secs (175% for 2 secs)
	Keypad control

Key Physical Features

	DIN rail mounting
	Easy access key slots for simple installation
	Easy access contactor style power terminals for intuitive easy wiring
	Help card for basic parameter description and terminal layout
	Easy to use keypad with bright LED display
	IP20
	5mm pitch, rising clamp control terminals

Key Control Features

	Analogue input supports (0..10V) and 4-20mA) modes
	Programmable I/O for flexible control
	Analogue input 12 bit resolution for accuracy
	Positive logic digital inputs (active high)
	Galvanically isolated and short circuit proof

Key Programming Features

	In-built brake chopper (S2 upwards)
	Programmable sleep mode for energy saving
	User PI control
	Auto restart mode
	Slip compensation
	Silent motor running with 32kHz ultra-quiet switching
	4 preset speeds
	"DC Injection" braking on enable to stop free wheeling motors
	Mains dip ride through
	Skip frequencies
	Last 4 trips stored with time stamp
	Parameter lock with password protection
	Hours run meter
	Display speed scaling factor for electronic gearing
	Spin start (S2 upwards)

Key Specifications

	Supply frequency 48 to 62 Hz
	Max. permissible 3-phase supply imbalance 3%
	Max. ambient temperature 50°C
	Max. altitude 2000 m
	Derate above 1000 m, 1% / 100 m
	I x t protection above 100% output current
	150% overload for 60 sec
	175% overload allowable for 2 sec
	Storage temperature -40 to +60°C

Dimensions

Size	Length (mm)	Width (mm)	Depth (mm)	Weight (kg)	Fixings
1	155	80	130	1.1	2 * M4
2	260	100	175	2.6	2 * M4